mareno77
Joined: 28 Aug 2005
Posts: 8
|
 Posted: Thu Sep 08, 2005 2:24 am Post subject: Need help on 125 SX Monoshock spring. |
 |
|
Hi all,
Need some help here.
I had managed to broke the bottom out bushing on the shock valve.
Not by riding over limit, only ride on the street and fire road.. but being overweight  , the bumper died within a month..
I weight 95 kgs, thus what spring rate should I use. any recommendation,
especially from Malaysian is much appreciated (as availability of the item is rather useful).
_________________
Paying my 125 SX using these:
http://www.12dailypro.com/?ref=896
http://4daily.com/?ref=54854 |
|
mxsteven
Joined: 23 May 2005
Posts: 279
Location: Malaysia, KL, Damansara Utama.
|
| Posted: Thu Sep 08, 2005 7:01 am Post subject: Re: Need help on 125 SX Monoshock spring. |
|
|
what i do normally is sending the shock to one of the famous machine shop here and ask them to revalve the thing, after that u may ask them to fill in cetain type of oil for better or higher damping force.
and all the works cost less than RM200. the whole absorber just like new.
| mareno77 wrote: | Hi all,
Need some help here.
I had managed to broke the bottom out bushing on the shock valve.
Not by riding over limit, only ride on the street and fire road.. but being overweight , the bumper died within a month..
I weight 95 kgs, thus what spring rate should I use. any recommendation,
especially from Malaysian is much appreciated (as availability of the item is rather useful). |
_________________
Where u go, it's up to u,
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven |
|
