MZ Riders    
A Community for owners and riders of MZ Motorcycles, Scooters, and ATVs.    
 

Baghira front suspension

 
Post new topic   Reply to topic    MZ/MuZ Riders Forum Index :: 660 cc
View previous topic :: View next topic  
Author Message
edec



Joined: 21 Jan 2006
Posts: 49
Location: California, USA

PostPosted: Wed Jul 19, 2006 12:06 am    Post subject: Baghira front suspension Reply with quote

Has anyone tried adding spacers in their forks to lessen fork dive while braking hard?
Back to top
View user's profile Send private message
drj



Joined: 29 Apr 2005
Posts: 106
Location: city of angels

PostPosted: Thu Jul 20, 2006 1:18 am    Post subject: Reply with quote

i hardly have any front end dive @ all...it actually helps absorb energy when it gives a bit - however - too much of course IS a bad thing.

overall the baggy suspension is a LOT better than most enduros out there...thanks to MZ for those nice 45mm front forks!!

u might wanna check the rebound settings first...before u do anything 'crazy'!! (unless your bike is older and has a lot of miles)

drj

_________________
'03 Baghira (m4 pipe)
'00 XR400r (modded a bit)
Back to top
View user's profile Send private message
Hoke



Joined: 07 Feb 2005
Posts: 56
Location: Stockholm, Sweden

PostPosted: Thu Jul 20, 2006 3:47 pm    Post subject: Reply with quote

Try to harden the comp and/or losen (counterclockwise) the rebound -but it does not make a major difference here (but i does help).
The easiest way to make it stiffer/more progressive is to ad more forkoil -but the best way is to change spring or as you say shorten the spring and add spacers (only spacer will give it less sag but will not make it stiffer).

I have the Baghira Forest edition with the S45 fork, it does not do the job at offroadrallys (it is 15 years older than the KTM:s setups -and it shows)..
My 1999 ktm 250 EXC fork is A LOT better (it is on a different level)

For usual roadtravel -the "baggyfork" works perfekt althow Very Happy
Back to top
View user's profile Send private message Visit poster's website
phlat65
Moderator


Joined: 13 Nov 2003
Posts: 703
Location: Seattle

PostPosted: Thu Jul 20, 2006 10:38 pm    Post subject: Reply with quote

the compression dampener adjuster only adjusts for high speed movements, and after 1/3 stroke. there is a long slot cut into the piston tube that ends at 1/3 stroke. it allows massive oil flow! more pre-load will only make it ride higher in the stroke, and it will still dive. stiffer springs help a little, but it is that slot that allows the fork to blow throught the stroke. slow down the re-bound on the rear shock first, and make sure the sag at the rear is set correctly (95-100mm on a full height), and run heavier fork oil. I have the progressive springs in a full height, with 5wt heavier than stock ( I don't remember what weight) and it still dives alot. i had a Height reduced, and it was alot more stable under hard braking. the forks are 3 inches lower than the full height.

slower rebound on the fork will make the front want to push easier.

_________________
2001 MZ Black Panther
2001 Suzuki RM125 (full Enduro)
Old Hondas- TT500 Ascott, 305 Dream Touring
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    MZ/MuZ Riders Forum Index :: 660 cc All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




www.MZRiders.com © lostblur
Powered by phpBB 2.0.10 © 2001, 2002 phpBB Group
Charcoal2 Theme © Zarron Media
ezPortal © Smartor